Coupled bending-torsion vibration of a homogeneous beam with a single delamination subjected to axial loads and static end moments

Delaminations in structures may significantly reduce the stiffness and strength of the structures and may affect their vibration characteristics. As structural components, beams have been used for various purposes, in many of which beams are often subjected to axial loads and static end moments. In the present study, an analytical solution is developed to study the coupled bending-torsion vibration of a homogeneous beam with a single delamination subjected to axial loads and static end moments. Euler–Bernoulli beam theory and the "free mode" assumption in delamination vibration are adopted. This is the first study of the influences of static end moments upon the effects of delaminations on natural frequencies, critical buckling loads and critical moments for lateral instability. The results show that the effects of delamination on reducing natural frequencies, critical buckling load and critical moment for lateral instability are aggravated by the presence of static end moment. In turn, the effects of static end moments on vibration and instability characteristics are affected by the presence of delamination. The analytical results of this study can serve as a benchmark for finite element method and other numerical solutions.     

Separation,Quantification and Structural Study of (+)‐Catechin and (–)‐Epicatechin by Ion Mobility Mass Spectrometry Combined with Theoretical Algorithms

Two catechin epimers and their non‐covalent complexes with γ‐cyclodextrin were studied by using ion mobility coupled with mass spectrometry (IM‐MS). Rapid separation of complexes was achieved with the peak‐to‐peak resolution reaching 0.86 after optimization of IM condition. Collision cross section (CCS) was measured to explore the structural difference of complexes. A gap of 11.75 Ų between two complexes was found. Molecular modeling and theoretical CCS calculation were adopted to explain the measurement results. Two binding ways of both complexes were found and the calculated CCS corresponds accurately to the measured CCS. Quantification of catechins in mixtures was performed and the relative error was less than 15%, indicating the effectiveness of quantification by IM‐MS.     

Two-Step Structure Phase Transition,Dielectric Anomalies,and Thermochromic Luminescence Behavior in a Direct Band Gap 2D Corrugated Layer Lead Chloride Hybrid of [(CH3)4N]4Pb3Cl10

A direct band gap 2D corrugated layer lead chloride hybrid, [(CH₃)₄N]₄Pb₃Cl₁₀ ( 1 ), shows analogous topology to the {Mg₃F₁₀⁴⁻}_∞ layer in Cs₄Mg₃F₁₀, and with the (CH₃)₄N⁺ cations locating in the inorganic layer voids and between the interlayers. Two reversible structural phase transitions occur in 1 at 225/210 K and 328/325 K upon heating/cooling, respectively. On going from the low- to intermediate-temperature phase, the space group changes from P2₁/c to Cmca, and the crystallographic axis perpendicular to the layers is doubled with the order–disorder transformation of (CH₃)₄N ⁺ cations between the interlayers. The intermediate- and high-temperature phases are isomorphic with similar cell parameters and packing structure; their main difference concerns the disorder degree of the (CH₃)₄N ⁺ cations between the interlayers. The two-step structural phase transitions lead to dielectric anomalies around the corresponding T_c. Interestingly, 1 shows multiband emission, originating from the recombination of exciton and emission of defects. Moreover, 1 exhibits divergent thermochromic luminescent features around the T_c on the intermediate to low temperature transition.     

Mesoporous chitosan‐immobilized iron tetrakis(4‐carboxyphenyl)porphyrin as a model of cytochrome P‐450 enzyme for oxidation of ethylbenzene

Mesoporous chitosan‐grafted iron tetra (4‐carboxyphenyl) porphyrin catalyst (Fe TCPP/mesp‐CTS) was prepared and investigated as a practical model for the nano‐cavity and coordinate regulation‐catalysis(CRC) function in cytochrome P‐450 enzyme. Fe TCPP/mesp‐CTS was characterized by X‐ray Diffraction (XRD), Thermogravimetry (TG), Ultraviolet–visible spectroscopy(UV‐Vis), Ultraviolet–visible– Diffuse reflectance spectroscopy (UV‐DRS), Scanning electron microscope (SEM), Fourier transform infrared spectroscopy (FT‐IR), and X‐ray photoelectron spectroscopy (XPS) techniques. The catalytic activity of Fe TCPP/mesp‐CTS for ethylbenzene oxidation was investigated and it was proved to be a better catalyst than Fe TCPP/macp‐CTS based on the ethylbenzene conversion, turnover numbers(TON), and the reusability. These results are attributed to the mesocavity and CRC of amino group in Fe TCPP/mesp‐CTS. The highest ethylbenzene conversion and yields of ketone and alcohol were 24.4% and 18.2%, respectively.     

Synthesis,characterization and electrocatalytic performance of a dinuclear triazenidosilver(I) complex for hydrogen production

Our group has developed a series of molecular electrocatalysts for hydrogen generation based on triazenido–metal complexes (cobalt, copper, etc.). In this paper, we first present the electrocatalytic performance of a new dinuclear silver complex, [Ag₂(L)₂], formed by the reaction of the triazenido ligand 1‐[(2‐carboxymethyl)benzene]‐3‐[(2‐methoxy)benzene]triazene (HL) with AgNO₃. At room temperature, the silver complex shows photoluminescence at 653 nm. The electrocatalytic systems based on this silver complex can afford 106.57 and 1536.36 moles of hydrogen per mole of catalyst per hour from acetic acid at an overpotential (OP) of 991.6 mV and from a neutral aqueous buffer (pH = 7.0) at an OP of 837.6 mV, respectively. Electrochemical investigations show that both silver ion and triazenido ligand play a role in determining the catalytic activities of the electrocatalytic system.     

An Unprecedented Two‐Fold Nested Super‐Polyrotaxane: Sulfate‐Directed Hierarchical Polythreading Assembly of Uranyl Polyrotaxane Moieties

The hierarchical assembly of well‐organized submoieties could lead to more complicated superstructures with intriguing properties. We describe herein an unprecedented polyrotaxane polythreading framework containing a two‐fold nested super‐polyrotaxane substructure, which was synthesized through a uranyl‐directed hierarchical polythreading assembly of one‐dimensional polyrotaxane chains and two‐dimensional polyrotaxane networks. This special assembly mode actually affords a new way of supramolecular chemistry instead of covalently linked bulky stoppers to construct stable interlocked rotaxane moieties. An investigation of the synthesis condition shows that sulfate can assume a vital role in mediating the formation of different uranyl species, especially the unique trinuclear uranyl moiety [(UO₂)₃O(OH)₂]²⁺, involving a notable bent [O=U=O] bond with a bond angle of 172.0(9)°. Detailed analysis of the coordination features, the thermal stability as well as a fluorescence, and electrochemical characterization demonstrate that the uniqueness of this super‐polyrotaxane structure is mainly closely related to the trinuclear uranyl moiety, which is confirmed by quantum chemical calculations.     

Tailorable PC71BM Isomers: Using the Most Prevalent Electron Acceptor to Obtain High‐Performance Polymer Solar Cells

Despite being widely used as electron acceptor in polymer solar cells, commercially available PC₇₁BM (phenyl‐C₇₁‐butyric acid methyl ester) usually has a “random” composition of mixed regioisomers or stereoisomers. Here PC₇₁BM has been isolated into three typical isomers, α‐, β₁‐ and β₂‐PC₇₁BM, to establish the isomer‐dependent photovoltaic performance on changing the ternary composition of α‐, β₁‐ and β₂‐PC₇₁BM. Mixing the isomers in a ratio of α/β₁/β₂=8:1:1 resulted in the best power conversion efficiency (PCE) of 7.67 % for the polymer solar cells with PTB7:PC₇₁BM as photoactive layer (PTB7=poly[[4,8‐bis[(2‐ethylhexyl)oxy]benzo[1,2‐b:4,5‐b′]dithiophene‐2,6‐diyl][3‐fluoro‐2‐[(2‐ethylhexyl)carbonyl]thieno[3,4‐b]thiophenediyl]]). The three typical PC₇₁BM isomers, even though sharing similar LUMO energy levels and light absorption, render starkly different photovoltaic performances with average‐performing PCE of 1.28–7.44 % due to diverse self‐aggregation of individual or mixed PC₇₁BM isomers in the otherwise same polymer solar cells.